学术周报 · IF≥10
骨科领域文献阅读汇编
2026年第42周 (2026-10-17) | PubMed (NLM) · DeepSeek 中英双语
数据来源: PubMed E-utilities · 影响因子筛选≥10 · 完整摘要不截断
数据来源: PubMed E-utilities · 影响因子筛选≥10 · 完整摘要不截断
★本周 Top 10 高影响力文献
Ŧ期刊分布统计
| 期刊 | 篇数 | IF |
|---|---|---|
| Carbohydrate polymers | 4 | IF 13.2 |
| Bone research | 2 | IF 20.1 |
| Acta biomaterialia | 2 | IF 10.4 |
| Science advances | 1 | IF 13.9 |
| Nature | 1 | IF 56.1 |
| Nature communications | 1 | IF 18.1 |
| Advanced healthcare materials | 1 | IF 11.0 |
| Journal of advanced research | 1 | IF 17.1 |
1生物材料/植入物 (4篇)
基础研究 (4篇)
The development of sustainable and high-performance alternatives to synthetic materials has become a key strategy for advancing the circular bioeconomy and maximizing the value of biomass resources. Transparent wood has emerged as a promising bio-based functional material, but its practical application remains constrained by limited functionality, energy-intensive fabrication processes, and poor recyclability. Herein, a photocurable functional holocellulose composite (FHC) was developed through the synergistic integration of a holocellulose scaffold, UV-curing technology, and a dynamic covalent network, with polymer rapidly polymerizing within the aligned microchannels of holocellulose scaffold, forming a robust interpenetrating structure combining optical management with mechanical reinforcement. The resulting FHC exhibited high haze (98.47%), relatively low thermal conductivity (0.23 W·m-1·K-1), outstanding thermal stability, and high mechanical strength (longitudinal fracture strength 28.25 MPa). Furthermore, the incorporation of β-hydroxy ester-based dynamic covalent bonds introduced thermal re-processability through transesterification at elevated temperature, enabling damaged FHC to be ground and hot-pressed into regenerated films with comparable even enhanced fracture strength (30.21 MPa). This work establishes a facile and cross strategy that combines transparent wood architecture, rapid UV-curing, and dynamic covalent chemistry, providing a scalable route toward recyclable, multifunctional, and high-value cellulose-based composites for energy-efficient buildings, privacy applications and light diffusers, and adaptive material systems.
中文摘要:可持续高性能合成材料替代品的开发已成为推进循环生物经济和最大化生物质资源价值的关键策略。透明木材作为一种有前景的生物基功能材料受到关注,但其实际应用仍受功能有限、制备过程能耗高和可回收性差制约。本研究通过将全纤维素支架、紫外固化技术与动态共价网络协同整合,开发了可光固化功能全纤维素复合材料(FHC),聚合物在全纤维素支架的取向微通道内快速聚合,形成兼具光学管理与机械增强的稳固互穿结构。所得FHC表现出高雾度(98.47%)、较低热导率(0.23 W·m-1·K-1)、优异热稳定性和较高力学强度(纵向断裂强度28.25 MPa)。引入基于β-羟基酯的动态共价键后,材料在高温下通过酯交换反应获得热再加工性,使受损FHC可被研磨并热压成再生薄膜,其断裂强度相当甚至提高(30.21 MPa)。该工作建立了一种简便且可交叉组合的策略,将透明木材结构、快速紫外固化和动态共价化学相结合,为面向节能建筑、隐私应用、光扩散器及自适应材料系统的可回收、多功能和高价值纤维素基复合材料提供了可规模化路径。
Natural polysaccharide hydrogels are attractive for biomedical applications due to their inherent biocompatibility and high water content. However, their mechanical performance is often limited by inefficient hydrogen bond utilization arising from restricted accessibility of bonding sites and competitive occupation by water molecules. Here, we propose a hydrogen bond accessibility engineering strategy to reconstruct the hydrogen bond network in chitosan-based hydrogels without altering their chemical composition. Surface activation of chitin nanofibers exposes additional hydrogen bond sites, while sequential solvent exchange and controlled freezing treatments reduce water occupation and promote solid-solid interactions, thereby enabling network densification. This strategy enhances interfacial coupling between nanofibers and the chitosan matrix, resulting in a highly interconnected load-bearing network. Consequently, compared with the primordial Cs-gel, the optimized hydrogel achieved an elastic modulus of 1880.4 kPa (25.7-fold higher), a 5.74-fold increase in fracture toughness, and a reduction in tensile hysteresis loss after 50 loading-unloading cycles from 40.6% to 25.9%, while maintaining a water content above 87%. Furthermore, the hydrogel was processed into diverse functional formats, including implantable patches, surgical sutures, and anisotropic 3D-printed constructs. This work establishes hydrogen bond accessibility as a key design principle for engineering mechanically robust, water-rich hydrogels.
中文摘要:天然多糖水凝胶因固有的生物相容性和高含水量,在生物医学应用中颇具吸引力。但其力学性能常受制于氢键利用效率不足,原因在于成键位点可及性受限以及水分子对位点的竞争性占据。我们提出一种氢键可及性工程策略,在不改变化学组成的前提下重构壳聚糖基水凝胶中的氢键网络。对甲壳素纳米纤维进行表面活化可暴露更多氢键位点,次序溶剂交换与受控冷冻处理降低水的占据并促进固-固相互作用,从而实现网络致密化。该策略增强了纳米纤维与壳聚糖基质之间的界面耦合,形成高度互连的承载网络。与原始壳聚糖凝胶相比,优化后水凝胶的弹性模量达到1880.4 kPa(提高25.7倍),断裂韧性提高5.74倍,50次加载-卸载循环后的拉伸滞后损失由40.6%降至25.9%,含水量仍保持在87%以上。该水凝胶还可加工为多种功能形态,包括可植入补片、外科缝合线和各向异性3D打印结构。氢键可及性由此成为设计力学强韧、高含水量水凝胶的关键原则。
Plastic deformation in body-centred cubic (bcc) metals and alloys is conventionally mediated by screw dislocations. Their temperature-sensitive motion is attributed to a steep rise in strength with decreasing temperature that constricts plastic zones at crack tips, leading to a ductile-to-brittle transition1. Here we evaluated the mechanical properties of group IV-V bcc refractory alloys with similar electronic structures at 20 K and found that these materials instead exhibit a plateau in tensile yield strength and fracture toughness as a function of temperature, with no apparent ductile-to-brittle transition. This behaviour arises from the global activation of twinning and an ω-phase transformation, which nucleate dislocations at interfaces before global dislocation motion. The initial mechanism is temperature insensitive and controls yielding, thereby preventing a crack-tip plastic zone from constricting with decreasing temperature.
中文摘要:体心立方金属与合金的塑性变形通常由螺位错介导。其温度敏感运动被认为导致强度随温度降低而陡增,使裂纹尖端塑性区收缩,进而引发韧脆转变。我们评估了具有相似电子结构的IV-V族体心立方难熔合金在20 K下的力学性能,发现这些材料反而表现为拉伸屈服强度和断裂韧性随温度变化呈平台,无明显韧脆转变。该行为源于孪生和ω相变的全局激活,它们在整体位错运动之前于界面处形核位错。初始机制对温度不敏感并控制屈服,从而防止裂纹尖端塑性区随温度降低而收缩。
Zn-based alloys have attracted substantial attention as next-generation biodegradable implant materials due to their intrinsic biodegradability, biocompatibility, and unique potential to facilitate tissue regeneration while providing temporary mechanical support. However, systematic studies investigating how different plastic-deformation strategies govern their microstructure and, consequently, their mechanical, corrosion, and biological performance remain scarce. Here, the effects of five plastic-deformation processes, namely, cold rolling, hot rolling, hot extrusion, hot rolling combined with asymmetric rolling, and hot extrusion combined with equal-channel angular pressing (HE+ECAP), on the microstructure, mechanical properties, degradation behavior, hemocompatibility, cytocompatibility, and antibacterial activity of a Zn-3Cu alloy were comprehensively investigated. Microstructural analysis revealed that all processed alloys consisted of an η-Zn matrix and a CuZn5 phase. Notably, the HE+ECAP alloy demonstrated a favorable combination of mechanical, degradation, and antibacterial properties, exhibiting a yield strength of ∼303.4 MPa, ultimate tensile strength of ∼312.4 MPa, elongation of 39.1%, degradation rate of ∼33.4 μm/year after immersion in Hanks' balanced salt solution (HBSS) for 28 days, and inhibition zone diameter of ∼12.8 mm against Staphylococcus aureus. Furthermore, all processed alloys demonstrated satisfying hemocompatibility and cytocompatibility. Overall, HE+ECAP processing synergistically enhanced the comprehensive properties of the Zn-3Cu alloy, advancing its potential for biodegradable orthopedic implants. STATEMENT OF SIGNIFICANCE: This work reports the effects of five plastic-deformation processes, namely, cold rolling (CR), hot rolling (HR), hot extrusion (HE), hot rolling combined with asymmetric rolling (HR+ASR), and hot extrusion combined with equal-channel angular pressing (HE+ECAP), on the microstructure, mechanical properties, degradation behavior, hemocompatibility, cytocompatibility, and antibacterial activity of a Zn-3Cu alloy. The HE+ECAP alloy demonstrated a favorable combination of mechanical, degradation, and antibacterial properties, exhibiting a yield strength of ∼303.4 MPa, elongation of 39.1%, degradation rate of ∼33.4 μm/year, and inhibition zone diameter of ∼12.8 mm against Staphylococcus aureus. All processed alloys demonstrated satisfying hemocompatibility and cytocompatibility. Overall, HE+ECAP synergistically enhanced the comprehensive properties of the Zn-3Cu alloy, advancing its potential for biodegradable orthopedic implants.
中文摘要:Zn基合金因固有的生物降解性、生物相容性以及在提供临时机械支撑的同时促进组织再生的独特潜力,作为下一代可降解植入材料受到广泛关注。然而,系统研究不同塑性变形策略如何调控其微观结构并由此影响力学、腐蚀和生物学性能的工作仍较少。研究考察了冷轧、热轧、热挤压、热轧结合异步轧制以及热挤压结合等通道转角挤压(HE+ECAP)五种塑性变形工艺对Zn-3Cu合金微观结构、力学性能、降解行为、血液相容性、细胞相容性和抗菌活性的影响。微观结构分析显示,所有加工态合金均由η-Zn基体和CuZn5相组成。HE+ECAP合金表现出良好的力学、降解和抗菌性能组合,其屈服强度约为303.4 MPa,抗拉强度约为312.4 MPa,延伸率为39.1%,在Hanks平衡盐溶液(HBSS)中浸泡28天后的降解速率约为33.4 μm/年,对金黄色葡萄球菌的抑菌圈直径约为12.8 mm。所有加工态合金均表现出良好的血液相容性和细胞相容性。结果显示,HE+ECAP工艺协同提升了Zn-3Cu合金的综合性能,提升了其用于可降解骨科植入物的潜力。意义陈述:该工作报道了冷轧(CR)、热轧(HR)、热挤压(HE)、热轧结合异步轧制(HR+ASR)以及热挤压结合等通道转角挤压(HE+ECAP)五种塑性变形工艺对Zn-3Cu合金微观结构、力学性能、降解行为、血液相容性、细胞相容性和抗菌活性的影响。HE+ECAP合金表现出良好的力学、降解和抗菌性能组合,其屈服强度约为303.4 MPa,延伸率为39.1%,降解速率约为33.4 μm/年,对金黄色葡萄球菌的抑菌圈直径约为12.8 mm。所有加工态合金均表现出良好的血液相容性和细胞相容性。结果显示,HE+ECAP协同提升了Zn-3Cu合金的综合性能,提升了其用于可降解骨科植入物的潜力。
2关节外科/置换 (3篇)
基础研究 (3篇)
Producing alloys from recycled metals via secondary synthesis can markedly cut energy use, greenhouse-gas emissions, and dependence on scarce, strategically important elements relative to primary routes. The central obstacle is the feedstock itself: Scrap is chemically heterogeneous and unpredictable, a "dirty" mix whose impurities typically embrittle materials. Conventional strategies address this challenge by diluting impurities through the addition of virgin material, thereby restricting scrap utilization, limiting microstructural design freedom, and undermining cost and sustainability benefits. Here, we introduce a fundamentally different, data-driven paradigm that deliberately reverses a five-millennia-old metallurgical injunction: Rather than purifying the alloy, we design the alloy to accommodate and exploit its contaminants. Using a model ductile iron representative of 120 million metric tons of heavily contaminated scrap, we couple experiments with deep-neural-network optimization to identify chemically robust, impurity-tolerant processing windows. The resulting "dirty" irons retain ductility and strength by integrating impurity effects into a purposeful microstructure, rather removing them. The approach achieves complete recyclability, an 8.1% reduction in manufacturing cost, and mechanical gains of up to 15.2% in ultimate tensile strength and 73.2% in elongation at fracture. Crucially, it overcomes the canonical strength-ductility trade-off while enabling far greater scrap utilization and material circularity. By endowing alloys with a practical "gene of scrap compatibility," this strategy reframes alloy design for a resource-constrained future and advances a mass-conserving circular economy for metals.
中文摘要:通过二次合成从再生金属生产合金,相较于原生路线,可显著降低能耗、温室气体排放以及对稀缺且具战略重要性元素的依赖。核心障碍来自原料本身:废料化学组成不均且难以预测,是一种「脏」混合物,其杂质通常使材料脆化。传统策略通过加入原生材料稀释杂质来应对这一挑战,从而限制了废料利用率、制约了显微组织设计自由度,并削弱了成本与可持续性收益。这里提出一种根本不同的数据驱动范式,有意逆转延续五千年的冶金戒律:不去纯化合金,而是设计合金以容纳并利用其污染物。以可代表1.2亿吨重度污染废料的模型球墨铸铁为对象,将实验与深度神经网络优化相结合,识别出化学稳健、耐杂质的工艺窗口。所得「脏」铸铁把杂质效应整合进有目的的显微组织,而非将其去除,从而保持延展性与强度。该方法实现完全可回收性,制造成本降低8.1%,极限抗拉强度最高提升15.2%,断裂伸长率最高提升73.2%。关键在于,它克服了经典的强度—延展性权衡,同时大幅提高废料利用率和材料循环性。通过赋予合金实用的「废料相容性基因」,该策略为资源受限的未来重构合金设计,并推进金属的质量守恒循环经济。
Cracks and losses in paper-based cultural relics critically threaten structural integrity and aesthetic coherence. Repairing paper fractures under stringent conservation criteria remains challenging, particularly when avoiding synthetic materials. Here, we designed film-forming adhesives composed of four polysaccharides, with curdlan as the primary component and chitosan, xanthan, and locust bean gum as synergistic texturizers that suppressed nanocrystal formation. The optimized formulation C9C1XL1 (1.215 wt% curdlan, 0.135% chitosan, 0.05% xanthan, 0.05% locust bean gum) achieved a tensile strength of 0.74 ± 0.05 kN/m in torn-edge raw Xuan paper fractures after accelerated aging, exceeding the cross-direction strength of intact paper with minimal chromatic shift. It also proved effective on bamboo paper and naturally aged wood pulp paper. SEM and confocal microscopy revealed a dual-role adhesion mechanism: curdlan formed a transparent film matrix filling interfiber voids for bulk mechanical support, while water-soluble polymers coated fiber surfaces, anchoring the fiber network through mechanical interlocking. Additionally, protruding cellulose fibers at repair sites functioned as load-bearing elements, substantially reinforcing tensile strength. The adhesive exhibited antifungal activity against the paper-degrading fungus Aspergillus niger, and showed promising reversibility (>90%) as evaluated by morphological analysis and fluorescence reduction. This study provides new insights into polysaccharide-based adhesives for paper conservation.
中文摘要:纸基文物中的裂纹和缺损严重威胁其结构完整性与美学协调性。在严格保护标准下修复纸张断裂仍有难度,尤其是避免使用合成材料时。本研究设计了由四种多糖组成的成膜黏合剂,以可得然胶为主要成分,壳聚糖、黄原胶和刺槐豆胶作为协同质构调节剂,可抑制纳米晶形成。优化配方 C9C1XL1(1.215 wt% 可得然胶、0.135% 壳聚糖、0.05% 黄原胶、0.05% 刺槐豆胶)在加速老化后,用于撕裂边缘生宣纸断裂修复时达到 0.74 ± 0.05 kN/m 的抗拉强度,超过完整纸的横向强度,且色差很小。该黏合剂在竹纸和自然老化木浆纸上也有效。SEM 和共聚焦显微镜揭示双重黏附机制:可得然胶形成透明膜基质,填充纤维间空隙以提供整体力学支撑;水溶性聚合物包覆纤维表面,通过机械互锁锚定纤维网络。修复部位突出的纤维素纤维作为承载单元,显著增强抗拉强度。该黏合剂对纸降解真菌黑曲霉具有抗真菌活性,形态分析和荧光降低评估显示其可逆性良好(>90%)。本研究为纸张保护用多糖基黏合剂提供了新认识。
The 2025 M7.8 Mandalay earthquake ruptured ~480 km of the Sagaing Fault, producing one of the longest strike-slip events documented and impacting a vulnerable region. Here we combine remote sensing observations and numerical modeling to show that the subsurface fault geometry and slip distribution could be anticipated from pre-event observations. Along-strike variations in coseismic and interseismic deformation reveal a helix-shaped fault geometry. The average coseismic slip equals or exceeds the interseismic slip deficit, consistent with a minimally slip-predictable model. We generate an ensemble of 3D dynamic rupture models, constrained by the best-fit static slip model, then discriminate among them using independent space-geodetic, seismic, and near-field video observations. The preferred scenario begins bilaterally, then transitions to unilateral southward supershear propagation at depth, while shallow rupture remains subshear. These dynamics are shaped by localized stress heterogeneity and low fracture energy, characteristic of a structurally mature fault zone. Our approach can inform rupture scenarios in understudied regions.
中文摘要:2025年缅甸曼德勒M7.8地震使实皆断裂约480 km发生破裂,是已记录的最长走滑事件之一,并影响了一个脆弱地区。我们将遥感观测与数值模拟结合,表明地下断层几何形态和滑动分布可从事件前观测中预估。同震与震间形变的沿走向变化揭示出螺旋状断层几何。平均同震滑动等于或超过震间滑动亏损,符合弱滑动可预测模型。我们构建了一组三维动态破裂模型,以最佳拟合静态滑动模型为约束,再用独立的空间大地测量、地震和近场视频观测进行甄别。优选情景以双侧破裂开始,随后在深部转为单侧向南的超剪切扩展,而浅部破裂仍为亚剪切。这些动力学受局部应力非均匀性和低断裂能控制,是结构成熟断裂带的特征。该方法可为研究不足地区的破裂情景提供参考。
3骨关节炎/软骨 (2篇)
基础研究 (2篇)
Osteoarthritis is a whole-joint disease in which cartilage loss, synovial inflammation, subchondral bone remodelling and pain-related neural changes co-evolve, yet structural improvement does not reliably translate into pain relief. This Review centres prostaglandin E2 (PGE2) skeletal interoception in the translational framework for 15-hydroxyprostaglandin dehydrogenase (15-PGDH) inhibition. In skeletal interoception, PGE2 produced in mechanically stressed bone and osteochondral tissues is sensed by prostaglandin E receptor 4 (EP4)-positive sensory afferents, relayed to central circuits and translated into altered sympathetic norepinephrine output. Because 15-PGDH catabolises PGE2, its inhibition may prolong the persistence and spatial reach of this interoceptive cue while also acting locally on chondrocyte state. This combined local and interoceptive action offers a plausible mechanism for cartilage repair and pain modulation, but may also create compartment-specific risk when prolonged PGE2 persists in synovium or subchondral bone. We compare 15-PGDH inhibition with upstream synthesis blockade and receptor-specific strategies, and propose that development should be organised around three checkpoints: cartilage-enriched exposure, durability under mechanical load and structure-pain coherence. Current evidence supports cautious development rather than broad generalisation; clinical translation will require compartment-resolved pharmacokinetics/pharmacodynamics, EP-receptor attribution and early surveillance for synovial, osteochondral and pain-system liabilities.
中文摘要:骨关节炎是一种全关节疾病,软骨丢失、滑膜炎症、软骨下骨重塑和疼痛相关神经改变共同演变,但结构改善并不能可靠转化为疼痛缓解。本综述将前列腺素E2(PGE2)骨骼内感受置于15-羟基前列腺素脱氢酶(15-PGDH)抑制的转化框架中心。在骨骼内感受中,机械应力骨和骨软骨组织中产生的PGE2由前列腺素E受体4(EP4)阳性感觉传入纤维感知,传递至中枢环路并转化为交感去甲肾上腺素输出的改变。由于15-PGDH分解代谢PGE2,其抑制可能延长该内感受信号的持续时间和空间范围,同时局部作用于软骨细胞状态。这种局部与内感受的联合作用为软骨修复和疼痛调控提供了可能机制,但当PGE2在滑膜或软骨下骨持续存在时也可能产生区室特异性风险。我们比较15-PGDH抑制与上游合成阻断及受体特异性策略,并提出开发应围绕三个检查点组织:软骨富集暴露、机械负荷下的耐久性和结构-疼痛一致性。当前证据支持谨慎开发而非广泛推广;临床转化需要区室解析的药代动力学/药效学、EP受体归因以及早期监测滑膜、骨软骨和疼痛系统风险。
Fibrosis is a major cause of chronic tissue dysfunction and contributes substantially to morbidity and mortality worldwide. Osteoarthritis (OA), affecting over 590 million people, is a prevalent fibrotic joint disease for which disease-modifying therapies remain lacking, partly because disease progression remains incompletely understood. As human-relevant in vitro models, including organ-on-chip and microphysiological systems, become increasingly important, non-invasive technologies capable of continuous cellular monitoring are urgently needed. Here, we implement high-density complementary metal-oxide-semiconductor (CMOS) multielectrode array (MEA)-based impedance profiling as a label-free platform for longitudinal assessment of OA-relevant chondrocyte remodeling. Human primary chondrocytes cultured on CMOS-MEA chips exhibited impedance increases that correlated with electrode occupancy and extracellular matrix (ECM) deposition. Spatial impedance mapping enabled visualization of injury-response dynamics, while oxidative stress induced progressive impedance decline accompanied by apoptosis, morphological remodeling, and chondrocyte dedifferentiation, evidenced by reduced collagen II and SOX9 expression and increased collagen I expression. In contrast, osteogenic de-differentiation produced increased impedance associated with ECM remodeling and matrix mineralization. Together, these findings support high-density CMOS-MEA impedance profiling as a non-invasive approach for monitoring cellular remodeling and provide a foundation for future integration of spatially resolved impedance sensing into advanced microphysiological systems for OA and other fibrotic diseases.
中文摘要:纤维化是慢性组织功能障碍的重要原因,也在全球范围内显著增加疾病负担和死亡风险。骨关节炎(OA)影响超过5.9亿人,是一种常见的纤维化关节疾病,目前仍缺乏改善病情的治疗手段,部分原因在于对疾病进展的认识仍不完整。随着类器官芯片和微生理系统等更接近人体的体外模型日益重要,能够持续监测细胞状态的无创技术需求迫切。本研究采用基于高密度互补金属氧化物半导体(CMOS)多电极阵列(MEA)的阻抗谱分析,作为无标记平台纵向评估与OA相关的软骨细胞重塑。培养于CMOS-MEA芯片上的人原代软骨细胞出现阻抗升高,并与电极占据率和细胞外基质(ECM)沉积相关。空间阻抗图谱可显示损伤反应动态;氧化应激引起阻抗逐步下降,并伴随细胞凋亡、形态重塑和软骨细胞去分化,表现为II型胶原和SOX9表达降低、I型胶原表达升高。成骨性去分化则产生与ECM重塑和基质矿化相关的阻抗升高。这些结果支持高密度CMOS-MEA阻抗谱分析可作为监测细胞重塑的无创方法,并为未来将空间分辨阻抗传感整合到面向OA及其他纤维化疾病的先进微生理系统奠定基础。
4创伤骨科 (1篇)
基础研究 (1篇)
The non-degradability of petroleum-based plastic films has caused irreversible global ecological damage, driving urgent demand for eco-friendly alternatives. As a sustainable, renewable, and biodegradable biomass material, cellulose emerges as an ideal substitute for plastic films, yet its industrial application is hindered by mechanical performance limitations. This review systematically summarizes strategies to enhance the mechanical properties of cellulose-based films, aiming to provide valuable references for researchers and engineers. First, a brief introduction about main cellulose types and common fabrication methods are introduced. Furthermore, core enhancement strategies are then elaborated from four aspects: scale optimization, structural design, densification treatments, and interfacial interaction regulation. In addition, advanced characterization techniques for film structure and fracture mechanisms are also summarized, including SEM/TEM for microstructure observation, universal testing machines for mechanical property measurement, and in-situ methods for real-time crack propagation analysis. Finally, key challenges and future development directions are discussed.
中文摘要:石油基塑料薄膜不可降解,已造成不可逆的全球生态损害,推动了对环境友好替代品的迫切需求。纤维素作为可持续、可再生、可生物降解的生物质材料,是塑料薄膜的理想替代物,但力学性能受限阻碍其工业应用。该综述系统总结提升纤维素基薄膜力学性能的策略,为研究人员和工程师提供参考。文中简要介绍主要纤维素类型与常见制备方法,并从尺度优化、结构设计、致密化处理、界面相互作用调控四方面阐述核心增强策略。还总结了薄膜结构与断裂机制的先进表征技术,包括用于微观结构观察的SEM/TEM、用于力学性能测量的万能试验机,以及用于实时裂纹扩展分析的原位方法。文末讨论关键挑战与未来发展方向。
5基础/生物材料 (1篇)
基础研究 (1篇)
Magnesium (Mg)-based implants are promising for lamina defect reconstruction because of their biodegradability, mechanical compatibility, and bioactivity. However, in vivo degradation is usually assessed at the whole-implant level, and it remains unclear whether distinct regions of the same implant experience different degradation-repair couplings. In this study, a ZE21C Mg alloy artificial lamina was implanted in a New Zealand rabbit lumbar lamina defect reconstruction model to evaluate region-dependent degradation and local repair responses. Finite element analysis showed higher equivalent stress and strain on the residual-bone side. SEM/EDS and micro-CT analyses demonstrated the asymmetric degradation of the same implant in vivo. The residual-bone side exhibited faster Mg degradation, more severe surface and interfacial degradation, and higher TRAP-related remodeling activity, whereas the opposite side degraded more slowly, maintained a denser interface, and exhibited better bone formation and tissue integration. At 12 weeks, the remaining implant volume was 20.2 ± 2.0% on the residual-bone side, compared with 41.9 ± 5.3% on the opposite side, demonstrating pronounced region-dependent degradation within the same implant. Transcriptomic analysis indicated that rapid degradation was accompanied by stronger bone resorption and inflammatory interface reactions. The slow degradation area is associated with a more vascularized repair microenvironment that supports the matrix. These findings indicate that accelerated regional degradation does not necessarily promote bone regeneration. Therefore, region-specific degradation control may be critical for designing biodegradable Mg implants in complex anatomical environments. STATEMENT OF SIGNIFICANCE: Biodegradable magnesium implants are generally evaluated by their average degradation rate, despite regional differences in mechanical and biological environments. In a rabbit lamina reconstruction model, we directly compared two regions of the same ZE21C magnesium artificial lamina, limiting implant- and animal-level variability. The residual-bone side experienced higher stress, faster degradation, a less stable interface, stronger osteoclast-related activity, and poorer bone formation; the opposite side degraded more slowly and supported better tissue integration. Transcriptomic analysis linked these outcomes to distinct inflammatory, bone-resorptive, vascular, and matrix-remodeling responses. Thus, faster magnesium degradation does not necessarily improve repair. This work identifies region-specific degradation control as a key design principle for biodegradable orthopedic implants in complex anatomical environments.
中文摘要:镁基植入物因可生物降解、力学相容性和生物活性,在椎板缺损重建中具有前景。然而,体内降解通常按整体植入物评估,同一植入物不同区域是否经历不同的降解-修复耦合仍不清楚。本研究将ZE21C镁合金人工椎板植入新西兰兔腰椎椎板缺损重建模型,评价区域依赖性降解和局部修复反应。有限元分析显示残骨侧等效应力和应变较高。SEM/EDS和micro-CT分析表明同一植入物体内降解不对称。残骨侧镁降解更快,表面和界面降解更严重,TRAP相关重塑活性更高;对侧降解较慢,界面更致密,成骨和组织整合更好。12周时残骨侧剩余植入物体积为20.2±2.0%,对侧为41.9±5.3%,显示同一植入物内明显的区域依赖性降解。转录组分析提示快速降解伴随更强的骨吸收和炎症界面反应。慢降解区与支持基质的血管化修复微环境相关。这些发现表明区域加速降解不一定促进骨再生。因此,针对区域的降解控制可能对复杂解剖环境中可降解镁植入物的设计至关重要。意义声明:可降解镁植入物通常按平均降解速率评价,尽管力学和生物学环境存在区域差异。在兔椎板重建模型中,我们直接比较同一ZE21C镁人工椎板的两个区域,减少植入物和动物层面变异。残骨侧承受更高应力、降解更快、界面更不稳定、破骨细胞相关活性更强、成骨更差;对侧降解更慢并支持更好的组织整合。转录组分析将这些结果与不同的炎症、骨吸收、血管和基质重塑反应联系起来。因此,更快的镁降解不一定改善修复。这项工作确定区域特异性降解控制是复杂解剖环境中可降解骨科植入物的关键设计原则。
6骨肿瘤 (1篇)
基础研究 (1篇)
Erythropoietin-producing hepatocellular (EPH) receptors, the largest receptor tyrosine kinase family, have been shown to play a crucial role in normal physiological processes and pathologies. EPHA2, encoded by EPHA2 gene, a member of the EPH receptor family, has been implicated in cataracts and various bone tumors, including osteosarcoma, chondrosarcoma, and bone metastases of breast cancer. However, no association between the EPHA2 gene and genetic skeletal disorders has been reported to date. Here, we identified a Chinese family with a diagnosis of dysosteosclerosis, presenting with significant increase in lumbar spine bone mineral density, multifocal sclerotic lesions throughout the body, sclerotic skull, platyspondyly and sandwich vertebrae, and demonstrated compound heterozygous mutations in EPHA2 gene (c.890 C > T, p.Thr297Met; c.988dupT, p.Ser330PhefsX51). We observed a reduction in numerous sclerotic lesions in patients during the five-year follow-up. To systematically investigate the molecular mechanisms of pathogenesis, we employed a range of methodologies, including in vitro cellular assays, genome-wide association studies analysis, induced pluripotent stem cells models and Epha2 knockout mice models. We have determined that loss-of-function mutations in EPHA2 gene lead to dysosteosclerosis through enhancing mesenchymal stem cells osteogenic differentiation and downregulating the p38-MAPK pathway, leading to decreased osteoclast differentiation. Consequently, we proposed and validated EPHA2 as a viable therapeutic target for osteoporosis by constructing femoral fracture mice models and ovariectomized mice models. In summary, this study identifies bi-allelic loss-of-function mutations in EPHA2 gene lead to dysosteosclerosis and its underlying mechanisms, and suggests EPHA2 as a potential therapeutic target for osteoporosis.
中文摘要:促红细胞生成素产生肝细胞(EPH)受体是最大的受体酪氨酸激酶家族,在正常生理过程和病理过程中发挥关键作用。EPHA2由EPHA2基因编码,是EPH受体家族成员,已被认为与白内障及多种骨肿瘤相关,包括骨肉瘤、软骨肉瘤和乳腺癌骨转移。但迄今尚未报道EPHA2基因与遗传性骨骼疾病存在关联。一个诊断为骨硬化性发育不良的中国家系被识别,表现为腰椎骨密度显著增高、全身多灶性硬化病变、颅骨硬化、扁平椎和三明治椎,并证实存在EPHA2基因复合杂合突变(c.890 C>T,p.Thr297Met;c.988dupT,p.Ser330PhefsX51)。五年随访期间观察到患者多处硬化病变减少。为系统研究发病的分子机制,采用了体外细胞实验、全基因组关联分析、诱导多能干细胞模型和Epha2敲除小鼠模型等多种方法。结果确定EPHA2基因功能丧失突变通过增强间充质干细胞成骨分化并下调p38-MAPK通路,导致破骨细胞分化减少,从而引起骨硬化性发育不良。据此,通过构建股骨骨折小鼠模型和去卵巢小鼠模型,提出并验证EPHA2是骨质疏松可行的治疗靶点。该研究识别EPHA2双等位基因功能丧失突变导致骨硬化性发育不良及其潜在机制,并提示EPHA2可作为骨质疏松的潜在治疗靶点。
7骨质疏松/骨代谢 (1篇)
基础研究 (1篇)
Postmenopausal osteoporosis (PMOP) is driven by bone marrow stromal cell (BMSC) senescence and aberrant adipogenesis, with 17β-estradiol (E2) deficiency as a primary trigger. However, the metabolic mediators linking systemic E2 loss to BMSC dysfunction remain undefined. Bile acids are established endogenous "metabolic rejuvenators," but the functional relevance of hyodeoxycholic acid (HDCA) to BMSC dysfunction and the development of PMOP has not been elucidated. This study aimed to determine the role of HDCA in the metabolic regulation of BMSC homeostasis and to characterize its therapeutic potential and underlying molecular mechanisms in the context of PMOP. Comprehensive serum bile acid profiling was performed in PMOP patients and healthy donors. Patient-derived BMSCs were treated with HDCA to evaluate its regulatory effects on senescence and lineage determination. The underlying molecular mechanisms involving the TGR5 (G protein‑coupled bile acid receptor 1)-ESR1 (Estrogen receptor 1) axis and mitochondrial quality control were explored through molecular docking, RNA sequencing, and pharmacological/genetic interventions, including the H2O2‑induced senescence model, TGR5/ESR1 siRNA knockdown, PKA inhibition, and the ovariectomized (OVX) mouse model. Serum HDCA showed the largest reduction among the differential bile acids in PMOP patients, and its levels correlated negatively with BMSC senescence and adipogenesis. Exogenous HDCA treatment dose-dependently inhibited senescence and corrected aberrant adipogenesis in patient-derived BMSCs. Mechanistically, HDCA bound the membrane receptor TGR5 with higher affinity than for the nuclear farnesoid X receptor (FXR), activating a cAMP-PKA signaling cascade that upregulates ESR1 expression and triggers PINK1/Parkin-mediated mitophagy to restore mitochondrial quality control. In OVX mice, oral HDCA administration replenished systemic HDCA levels, reversed bone architecture deterioration, and activated TGR5-ESR1 signaling in both intestinal and bone tissues. HDCA supplementation alleviates BMSC senescence and aberrant adipogenesis through the TGR5-ESR1-mitophagy axis, providing a basis for the development of endogenous metabolite-based, non-hormonal strategies for PMOP.
中文摘要:绝经后骨质疏松(PMOP)由骨髓基质细胞(BMSC)衰老和异常成脂分化驱动,17β-雌二醇(E2)缺乏是主要诱因。然而,将全身E2丢失与BMSC功能障碍联系起来的代谢介质仍未明确。胆汁酸是公认的内源性「代谢焕新剂」,但猪去氧胆酸(HDCA)与BMSC功能障碍及PMOP发生的功能相关性尚未阐明。本研究旨在确定HDCA在BMSC稳态代谢调控中的作用,并刻画其在PMOP背景下的治疗潜力及潜在分子机制。对PMOP患者和健康供者进行了全面血清胆汁酸谱分析。用HDCA处理患者来源BMSC,评估其对衰老和谱系决定的调控作用。通过分子对接、RNA测序以及药理学/遗传学干预(包括H2O2诱导衰老模型、TGR5/ESR1 siRNA敲低、PKA抑制和去卵巢(OVX)小鼠模型),探究涉及TGR5(G蛋白偶联胆汁酸受体1)-ESR1(雌激素受体1)轴和线粒体质量控制的潜在分子机制。PMOP患者差异胆汁酸中血清HDCA降幅最大,其水平与BMSC衰老和成脂分化呈负相关。外源性HDCA处理以剂量依赖方式抑制患者来源BMSC衰老并纠正异常成脂分化。机制上,HDCA与膜受体TGR5结合亲和力高于核法尼醇X受体(FXR),激活cAMP-PKA信号级联,上调ESR1表达并触发PINK1/Parkin介导的线粒体自噬,恢复线粒体质量控制。在OVX小鼠中,口服HDCA补充全身HDCA水平,逆转骨结构恶化,并激活肠道和骨组织中的TGR5-ESR1信号。HDCA补充通过TGR5-ESR1-线粒体自噬轴减轻BMSC衰老和异常成脂分化,为开发基于内源性代谢物的非激素PMOP策略提供依据。